KM Diamond Helmet w/MWPC

The Kirby Morgan® Diamond is the next modular variation to the KMDSI stainless steel helmet. Before the diver enters the water, with a simple two-step process, they have the opportunity to switch the helmet into surface vent mode, where their exhaled gas is sent to the surface and not into the surrounding water where they are working. The exhaled gas can be sent to a reclaim system or secured on an open deck to vent into the atmosphere on the surface or in the bell. The KM Diamond can also operate in the open circuit mode for the entire dive

Manufacturer Number: 500-711

Add to quote
Category: Brand:

Key Specifications

  • Weight – 34.8 lbs
  • Helmet Shell – Stainless Steel
  • Control Knobs – Polyurethane
  • Face Port/Lens – Scratch Resistant Polycarbonate
  • Neck Dam – Neoprene. Optional latex neck dam available.
  • O-Rings – Buna-N
  • Head Cushion – Nylon bag filled with #4 Polyester foam
  • Recommended Lubricants – Kirby Morgan recommends Christo-Lube® or equivalent for all gas train components. Dow Corning® 111 Silicone or equivalent may be used for this helmet ONLY when noted.
  • Inhalation Regulator – The Inhalation Body and Pod is one complete unit with the regulator based on the Kirby Morgan 455 Balanced Regulator.
  • CR Standards – This helmet meet or exceed all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.

Available downloads for this product:

Related products